The following information is required when specifying
tongue and groove siding products:
| Specification Information Required
|
Sample Specification |
Species:
Western Red Cedar |
WRCLA Western Red Cedar |
Product Pattern and Intended Use:
Siding is used as an exterior cladding to provide
both weather protection and architectural style.
The designer may choose from Edge V one side (EV1S)
WRCLA1, Edge V two sides (EV2S), WRCLA2, or specific
pattern number. |
Tongue and Groove EV1S - WRCLA1 |
Size:
Specify the nominal size of the product. |
1 x 6" |
Grade:
The grade of the product governs its overall quality.
Refer to WRCLA specification literature or grading
agency rule books for available grades. |
Select Knotty |
Grading Agency Paragraph:
To ensure that the product meets a written standard,
an agency grade paragraph should be referenced.
|
NLGA para. 204a |
Moisture Content:
Specify whether the product is to be green (unseasoned)
or kiln-dried. |
Green |
Surface to be exposed:
Specify the application orientation to assist the
supplier in shipping the right product for the job.
|
Sawn face |
Quantity:
Express in board feet the quantity required. See
WRCLA table for factor to convert square feet of
wall area to board feet. |
5500 board feet |
